Quality Products and Industry Leading Service
Cart 0

Quality Products and Industry Leading Service

BaoFeng Programming

Add your own channels to your BaoFeng hand held with a few simple buttons. This will only add frequencies - to "rename" them you will need to bring your radio to a race, send to PCI or download software and a programming cable. 

BaoFeng UV-5R:

  1. Press (VFO/MR) until the frequency number is displayed on the screen. (example: 151.625)
  2. Press (A/B) until the arrow is on the top frequency.
  3. Type in the frequency you want to add to the radio. (example: 153.035)
  4. Press Menu, 2, 7, Menu.
  5. Type in the channel number you want to save as, or press up/down to get to desired channel.
  6. Press Menu to save.

BaoFeng T55:

  1. Power Off the Radio. Press and Hold Menu while power on. (This is how to get ti into VFO mode) 
  2. Type in the frequency you want to add to the radio. (example: 153.035)
  3. Press Menu, 2, 7, Menu.
  4. Type in the channel number you want to save as, or press up/down to get to desired channel.
  5. Press Menu to save.
  6. Power off and Hold menu while powering on to go back into normal operation. (Exit VFO mode)