Quick Disconnect Steering Wheel Assembly with Two Nexus PTT
Have a quick release steering wheel and want to wire up your horn and Push to talk? This assembly kit will allow you to mount the female jack in the dash and quick release the wires from your dash when you remove the steering wheel.
- Male PTT to connect to the back of intercom to Female flush mount for the dash.
- Red PTT button for the radio and black PTT button for an accessory, coil cord with male end quick disconnect.
- Two aluminum PTT brackets to mount buttons.
Do not hook power up to any of these wires, you will damage the intercom! You will need a relay (and a little wiring knowledge) to hook up the button to a horn or other accessory like a siren so you don't send power into the system. Here is a wiring diagram.
The PTT end is designed to work with a harness or a Comlink 10 intercom and has a male end. If using with a 4 Link Pro or Trax Intercom System, add on the gender changer to convert to a female PTT connection.
Steering wheel not included, shown in photo for display purposes only.
The cables worked perfectly and I can again communicate from my Alumicraft prerunner.
Good prices...perfect performance
Solid, well built product. Only thing to note is that these buttons are smaller than the typical PTT buttons that come in the Radio Kits. It would be a cool accessory to have a washer to adapt these smaller buttons to the larger holes that you find on the single and double button adapters for the 6-bolt aftermarket steering wheels. I was able to source some washers to make it work, but a machined adapter would ensure better fitment. The included adapter would work but I only received one not two.
The Quick disconnect steering wheel adapter made it easy for us to have ptt with a removable steering wheel awesome product
If you don't have them already or are thinking of getting them, just do it. Convenient and second nature to use them, you don't have to let go of the wheel.
Easy to wire in.