Can-Am X3 Pillar Replacement Bracket with Side Panels
Side panels included.
- Description
- Instructions
- Instructional Video
Upgrade your Can-Am X3 with our premium pillar replacement bracket, designed for hassle-free installation while maintaining perfect access to all controls. This ingenious bracket seamlessly integrates with your X3, effectively relocating the Start/Stop button for enhanced functionality and convenience during your rides.
- Available for Kenwood and Icom Radios
- All Hardware Included
- Side Panels Included
- Some Cutting Required
- Compatible with X3's 2017+
- Option available to add Switch Pros 8.
NOTE: This bracket will NOT fit 2026 Can-Am X3 models with the optional 10.25" Touch Screen Center Display
Before you purchase or install an Icom Radio into your Can Am - PCI STRONGLY recommends upgrading to the Kenwood NX-1700 Mobile Radio. With exceptional RF noise filtering, the Kenwood is a must for UTV's with dual stators like the CanAm and RZR Turbo S. The Kenwood also requires less power to transmit at full strength, ideal for vehicles with smaller batteries or vehicles with a lot of aftermarket accessories.
I installed the Pillar Replacement Bracket with Side Panels on my 2023 Can Am X3 XRS without any issues. The fitment was perfect.
The kit comes with a single page sheet of installation instructions with a QR code printed on it so that you can also access a YouTube Video that shows a step by step installation.
As with most installation instructions, I recommend reading the single page instruction sheet and watching the video from start to finish before starting the project.
Having done that, I had no issues.
I choose this plate over others because of the bend at the top. Most other plates are just straight cut on the top, and when you’re mounting this many things on the plate there isn't much overlap at the top edge, and your cut has to be perfect to look good. The rounded 90 deg bend at the top makes this place look significantly nicer than other options when mounted, and it covers any roughness’ in your cuts. I would recommend this one over other options if you want the cleanest look.
Fit perfect
Another quality product from PCI, the mount fit well and made is made of solid materials not cheap flimsy sheet metal
Nice upgrade for a clean install and better protection from the elements. I added before and after pictures.
Install was simple and straightforward.
Two recommendations for improvement:
1. The holes for the side panel clips are pre-drilled too small for the clips provided. The clips were extremely difficult to push through. I drilled out the holes and the clips we easier to push through.
Recommend the pre-drilled size for these holes be larger.
2. I ordered the wrong configuration because I wanted the switch panel but have the iCom radio. Only the Kenwood radio adapter is available with that panel and no measurements were available. I had to order an additional adapter plate for $40 to get the panel and adapter I needed.
I recommend another option for iCom radio and switch panel.
Hi Neal,
We are glad you are enjoying the system. From time to time the coating on the panels can make the holes a bit tight for the pins to go in. Sorry you experianced that on yours but it sounds like you are good to go now. If there is anything else we can help with please just reach out!
- 5 stars: 45 (98%)
- 4 stars: 1 (2%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
I choose this plate over others because of the bend at the top. Most other plates are just straight cut on the top, and when you’re mounting this many things on the plate there isn't much overlap at the top edge, and your cut has to be perfect to look good. The rounded 90 deg bend at the top makes this place look significantly nicer than other options when mounted, and it covers any roughness’ in your cuts. I would recommend this one over other options if you want the cleanest look.
Nice upgrade for a clean install and better protection from the elements. I added before and after pictures.
Install was simple and straightforward.
Two recommendations for improvement:
1. The holes for the side panel clips are pre-drilled too small for the clips provided. The clips were extremely difficult to push through. I drilled out the holes and the clips we easier to push through.
Recommend the pre-drilled size for these holes be larger.
2. I ordered the wrong configuration because I wanted the switch panel but have the iCom radio. Only the Kenwood radio adapter is available with that panel and no measurements were available. I had to order an additional adapter plate for $40 to get the panel and adapter I needed.
I recommend another option for iCom radio and switch panel.
Hi Neal,
We are glad you are enjoying the system. From time to time the coating on the panels can make the holes a bit tight for the pins to go in. Sorry you experianced that on yours but it sounds like you are good to go now. If there is anything else we can help with please just reach out!
This bracket is awesome. Makes can-am look High Dollar. Very strong radio's don't shake all over the place.👍👍
Dash prep was easy, just follow the directions or watch the video. The provided push-pins were a little large, had to drill out the pre-drilled holes on the side panels.
The fit and trim on these installation Brackets are bar non the best on the market.
This Pillar fits into the Can-am dash beautifully. Both radio units fit great and you are not left with any ugly features because PCI provides a precision ring to install over and around the radio. Also you can notice that the Pillar contours the upper dash right below the rocker switches. PCI only puts out our good quality products!
See photo.
Thank you PCI for a great product.
Cheers!
BB
I installed the Pillar Replacement Bracket with Side Panels on my 2023 Can Am X3 XRS without any issues. The fitment was perfect.
The kit comes with a single page sheet of installation instructions with a QR code printed on it so that you can also access a YouTube Video that shows a step by step installation.
As with most installation instructions, I recommend reading the single page instruction sheet and watching the video from start to finish before starting the project.
Having done that, I had no issues.
Fit perfect
Another quality product from PCI, the mount fit well and made is made of solid materials not cheap flimsy sheet metal
Good Sound
Easy install and looks a lot better than what can am put in stock. Clean looking finish for mounting radio and intercom.
Excellent product and fit. When cutting, make sure you leave enough of the plastic for the bolts to go into.
If your putting a radio in you machine this is a must have. Since day one I’ve always thought every below the start button looks like absolute garbage. Not only does this improve the look of the dash it’s extremely functional.
Bracket fit great in the car and both radio and intercom fit as it was supposed. Made install much easier and much better quality than that of competitors like. RR.
Fits great. Easy install. Looks great
The fit and finish is great. I've been a customer for more than 20 years and PCI has always helped me out for all my radio and racing needs. I highly recommend them and will continue to shop with them first.
Highly recommend PCI over other brands just based off looks! FIT and FINISH definitely leave your x3 dash looking trick.. top notch stuff.
Good product, fits alot better than the 1 I bought for my rugged radios that I replaced with PCI.
Fit and finish on this were top notch. The install video was a little misleading though... It made it seem like this install was pretty simple, well it was easier than the video made it look. Could not be happier.
Quality piece, looks and works great. Very sturdy. Highly recommended.
Really high quality, good fitment. Strongest part of my dash.
Solid addition. Stiffened the dash nicely and looks great. I did have ream the holes on the side panels to work with the provided push pins.
Like everything else I've bought from PCI the pillar replacement bracket was high quality. I highly recommend it